pg. 10 Turn signals
Turn signals
1 Signal lever engaged for normal turns.
2 Lane change position. In maneuvers such as lane changing, the driver can flash the turn signals by
moving the turn signal lever to the first stop and holding it there. The lever will return to the neutral
position when released.
3 High and low beam switching (headlights on).
Move the lever towards the steering wheel and release it.
3 Headlight flasher (headlights off).
Move the lever towards the steering wheel. The headlight high beam will be on until the lever is
released.
pg. 11 Wipers
file:///K|/ownersdocs/1977/1977_262_264_265/77262264265_01a.htm (8 of 14)12/22/2006 10:08:26 PM
To Next Page
Loading...
