The front seats and the rear outboard seats are provided with retracting inertia belts.
To buckle: Pull the belt slowly across your body until the latch plate can be inserted into the buckle with
a discernable snap. Take care that the belt does not twist.
To release, depress red pushbutton on the buckle and let the belts rewind to its rest position.
The seat belts are normally "unlocked" to allow movement while seated. However, the belt will lock and
restrict movement:
● if belt is pulled out rapidly
● during braking and acceleration
● if the vehicle is leaning excessively
● when driving in turns
Check seat belt mechanism function as follows:
● Attach the seat belt. Pull heavily on the strap.
● Brake firmly from approximately 30 mph (50 km/h) or drive in a tight circle (check other traffic
first!). Pull the belt.
file:///K|/ownersdocs/1977/1977_262_264_265/77262264265_01b.htm (5 of 15)12/22/2006 10:08:27 PM
To Next Page
Loading...
