INTRODUCTION
Read through all of the instructions before starting installation.
Notifications and warning texts are for your safety and to
minimise the risk of something breaking during installation.
Ensure that all tools stated in the instructions are available
before starting installation.
Certain steps in the instructions are only presented in the form
of images. Explanatory text is also given for more complicated
steps.
In the event of any problems with the instructions or the
accessory, contact your local Volvo dealer.
Preparations
1
J8601089
Preparations
Remove the four screws (1) for the bumper cover. The screws
are underneath/on the sides of the tailgate opening and in the
lower edge of the bumper.
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
To Next Page
Loading...
