Meeting API specification SG, SG/CD, SH or Energy Conserving (EC) II
For best fuel economy and engine protection consult with your authorized Volvo retailer for
recommended oils. Oils with a different quality rating may not provide adequate engine protection.
Viscosity (stable ambient temperatures):
Do not use oils with other viscosity ratings. The use of incorrect viscosity oil can shorten engine life.
Volvo recommends the use of energy-conserving oils. Look for the API label. Synthetic oils complying
with oil quality requirements are recommended for: driving in areas of sustained temperature extremes
(hot or cold), when towing a trailer over long distances or for a prolonged driving in mountainous areas.
Extra oil additives must not be used unless advised by an authorized Volvo retailer.
SAE 15W/40 is recommended for use in driving conditions that raise oil temperature and increase oil
consumption (i.e., mountain driving; trailer towing).
NOTE: SAE 15W/40 must not be used at low ambient temperatures; see viscosity chart.
Changing oil and oil filter
Oil and oil filter changes should be made as specified in the following table:
If driving conditions include: Then the correct oil/oil filter change interval is:
file:///K|/ownersdocs/1996/1996_960/96960_806.htm (3 of 10)12/30/2006 10:13:10 AM
To Next Page
Loading...
