Press the SEEK button to seek for higher frequencies. The radio seeks the next audible station and stops
there. If you wish to continue the seek tuning, press the SEEK button again.
B - Preset programming
1. Tune to the desired frequency.
2. Depress and hold a preset button. The audio will cut out. Keep the button depressed until the audio
comes on again (approx. 2 seconds).
3. The frequency is now stored on this preset button.
C - Preset buttons
To select a pre-programmed radio frequency, depress the preset button. The set frequency will be
displayed.
pg. 1:23 Radio SC-710
A - Automatic programming (Auto seek)
To Next Page
Loading...
