● the unit must be turned on
Make sure the headlights are turned off to help prevent battery drain.
Enter the code again once this time has elapsed.
pg. 1:32 Radio SC-811
A - On/off switch and volume control
Turn the button clockwise to switch on and to increase the volume.
B - Waveband selector
The desired waveband is set by pressing one of the waveband selector buttons. The frequency and
waveband is shown on the display.
NOTE: There are two FM wavebands and two AM wavebands. This makes it possible to store 2 x 6 FM
stations and 2 x 6 AM stations in memory.
To Next Page
Loading...
