there. If you wish to continue the seek tuning, press the tuning knob again.
B - Preset programming
1. Tune to the desired frequency.
2. Depress and hold a preset button. The audio will cut out. Keep the button depressed until the audio
comes on again (approx. 2 seconds).
3. The frequency is now stored on this preset button.
C - Preset buttons
To select a pre-programmed radio frequency, depress the preset button. The set frequency will be
displayed.
pg. 1:34 Radio SC-811
A - Automatic programming (Auto seek)
This function automatically seeks and stores up to 8 strong AM or FM stations. This is especially useful
To Next Page
Loading...
