Volvo S90 TWIN ENGINE - Renaming a Driver Profile

DISPLAYS AND VOICE CONTROL
}}
133
Renaming a driver profile
It is possible to change the name of the different
driver profiles used in the car.
1.
Press
Settings in the top view in the centre
display.
2. Press
System Driver Profiles.
3.
Select
Edit Profile.
> A menu opens, where the profile can be
edited.
4.
Tap in the box
Profile Name.
> A keyboard appears, and it is possible to
change the name. Tap on
to close
the keyboard.
5.
Save the name change by pressing
Back or
Close.
> The name has now been changed.
NOTE
A profile name cannot start with a space, as
the profile name will not then be saved.
Related information
•
Selecting driver profile (p. 132)
•
Keyboard in centre display (p. 120)
Resetting settings in the driver
profiles
Settings that have been saved to one or more
driver profiles can be reset if the car is station-
ary.
NOTE
Factory reset is only possible when the car
is stationary.
1.
Press
Settings in the top view.
2. Press System Factory reset Reset
Personal Settings
.
3.
Select one of the options
Reset for the
active profile, Reset for all profiles or
Cancel.
Related information
•
Driver profiles (p. 131)
•
Resetting settings in the centre display
(p. 129)
Linking remote control key to driver
profile
It is possible to link your key to a driver profile.
The driver profile along with all of its settings will
then be automatically selected every time the car
is used with that specific remote control key.
The first time the remote control key is used, it is
not linked to any specific driver profile. When the
car is started, the
Guest profile will automatically
be activated.
A driver profile can be selected manually without
linking it to the key. When the car is unlocked,
the last active driver profile is activated. Once the
key has been linked to a driver profile, a driver
profile does not need to be selected when that
specific key is used.
Linking a remote control key to a driver
profile
First select the profile to be linked to the key, if
the profile to be linked is not already active. The
active profile can then be linked to the key.
1.
Press
Settings in the top view in the centre
display.
2. Press
System Driver Profiles.
3. Select the desired profile. The display returns
to the home view. The
Guest profile cannot
be linked to a key.