||
DISPLAYS AND VOICE CONTROL
134
4. Drag down the top view again and tap on
Settings System Driver Profiles
Edit Profile.
5.
Select
Connect key to link the profile with
the key. It is not possible to link a driver pro-
file to a different key than the one currently
being used in the car. If there are multiple
keys in the car, the message More than one
key is found, put the key you want to
connect on backup reader will be dis-
played.
Backup reader's location in the tunnel console.
>
When the message
Profile connected
to key is shown, the key and the driver
profile are linked.
6.
Press
OK.
> This key is now linked to the driver profile
and will remain linked as long as the
Connect key box is not unticked.
Related information
•
Driver profiles (p. 131)
•
Renaming a driver profile (p. 133)
•
Remote control key (p. 223)
Message in centre display
The centre display can show messages to
inform or assist the driver in the event of different
events.
Message in the centre display's top view.
The centre display shows messages that are of
lower priority for the driver.
Most messages are shown above the centre dis-
play's status bar. After a while, or when any
required action related to the message has been
taken, the message disappears from the status
bar. If a message needs to be saved, it is posi-
tioned in the top view in the centre display.
Message composition may vary and they can be
shown together with graphics, symbols or a but-
ton for activating/deactivating a function linked
to the message.
To Next Page
Loading...
