Volvo S90 TWIN ENGINE - Angling the Door Mirrors

||
WINDOWS, GLASS AND MIRRORS
* Option/accessory.
166
Automatic dimming*
Bright light from behind is automatically dimmed
by the interior rearview and door mirrors. Auto-
matic dimming is always active while driving, apart
from when gearbox reverse position is selected.
NOTE
When sensitivity is changed there is no imme-
diately noticeable change in dimming, but the
change will be complete after a while.
Dimming sensitivity will affect both the interior
rearview mirror and the door mirrors.
1.
Press
Settings in the top view in the centre
display.
2. Press
My Car Mirrors and Convenience.
3.
Under
Rearview Mirror Auto Dimming,
select Normal, Dark or Light.
The interior rearview mirror contains two sensors
- one forward facing and one rearward facing -
that work together to identify and eliminate daz-
zling light. The forward facing sensor detects
ambient light, while the rearward facing sensor
detects the light from vehicle headlights behind.
For the door mirrors to be equipped with auto-
matic dimming, the interior rearview mirror must
also be equipped with automatic dimming.
NOTE
If the sensors are obscured by e.g. parking
permits, transponders, sun visors or objects in
the seats or on the parcel shelf in such a way
that light is prevented from reaching the sen-
sors, then the dimming function of the interior
rearview and door mirrors is reduced.
Related information
•
Rearview and door mirrors (p. 165)
•
Angling the door mirrors (p. 166)
Angling the door mirrors
To ensure better visibility to the rear, the door
mirrors need to be set to the preferences of the
driver. There are a number of automatic settings
that can also be linked to the memory function
buttons for the power seat*.
Using controls for door mirrors
Controls for door mirrors.
The door mirror positions are adjusted with the
joystick in the driver's door control panel.
1.
Press the L button for the left-hand door mir-
ror or the R button for the right-hand door
mirror. The light in the button illuminates.
2. Adjust the position with the joystick in the
centre.
3.
Press the L or R button again. The light
should no longer be illuminated.