WINDOWS, GLASS AND MIRRORS
}}
* Option/accessory.
173
Related information
•
Using windscreen and headlamp washers
(p. 173)
•
Heated windscreen wiper nozzles* (p. 172)
•
Using the rain sensor's memory function
(p. 173)
•
Filling washer fluid (p. 625)
•
Wiper blades in service position (p. 624)
•
Replacing windscreen wiper blades (p. 623)
•
Using windscreen wipers (p. 171)
Using the rain sensor's memory
function
The rain sensor automatically starts the wind-
screen wipers based on how much water it
detects on the windscreen.
Activating/deactivating the memory
function
The memory function for the rain sensor can be
activated in such a way that the rain sensor but-
ton does not need to be depressed each time the
car is started:
1.
Press
Settings in the top view in the centre
display.
2. Press
My Car Wipers.
3.
Select
Rain Sensor Memory to activate/
deactivate the memory function.
Related information
•
Using the rain sensor (p. 172)
•
Using windscreen and headlamp washers
(p. 173)
•
Heated windscreen wiper nozzles* (p. 172)
•
Filling washer fluid (p. 625)
•
Wiper blades in service position (p. 624)
•
Replacing windscreen wiper blades (p. 623)
•
Using windscreen wipers (p. 171)
Using windscreen and headlamp
washers
Windscreen and headlamp washers clean the
windscreen and headlamps. Windscreen and
headlamp washers are started using the right-
hand stalk switch.
Starting windscreen and headlamp
washers
Washing function, right-hand stalk switch.
–
Move the right-hand stalk switch toward the
steering wheel to start the windscreen and
headlamp washers.
> The windscreen wipers will make several
more sweeps once the stalk switch has
been released.
To Next Page
Loading...
