Volvo S90 TWIN ENGINE - Storing Memory Function in Power Operated Front Seat

To Next Page

To Previous Page

SEATS AND STEERING WHEEL

* Option/accessory.

178

Only one movement (forward/back/up/down)

can be made at a time.

The backrests of the front seats cannot be low-

ered fully forward.

Related information

•

Manual front seat (p. 176)

•

Power front seat* (p. 177)

•

Storing memory function in power operated

front seat* (p. 178)

•

Using stored memory in a powered front seat

(p. 179)

•

Adjusting massage settings* in the front seat

(p. 180)

•

Adjusting the length of the seat cushion in

the front seat (p. 181)

•

Massage settings in the front seat* (p. 179)

•

Adjusting the side support* in the front seat

(p. 181)

•

Adjusting the lumbar support* in the front

seat (p. 182)

•

Adjusting the passenger seat from the driv-

er's seat* (p. 183)

Storing memory function in power

operated front seat*

The memory function stores settings for the seat,

door mirrors, and head-up display*.

It is possible to store two different settings with

the memory function. The memory function key-

pad is located either on one front door or both*.

Button M for storing settings.

Memory button

Store setting

1. Adjust seat, door mirrors and head-up display

to the desired position.

Press and hold the M button depressed. The

light indicator in the button illuminates.

Within three seconds, press and hold the 1

or 2 button.

> When the position has been stored in the

selected memory button an acoustic sig-

nal sounds and the light indicator in the M

button extinguishes.

If none of the memory buttons is depressed

within three seconds then the M button extin-

guishes and no storing takes place.

The seat must be adjusted again before a new

memory can be set.