Volvo S90 TWIN ENGINE - Reactivating the Speed Limiter from Standby Mode

DRIVER SUPPORT
}}
275
Reactivating the Speed Limiter from
standby mode
The speed limiter (SL
16
) can be reactivated after
having been temporarily deactivated and placed
in standby mode.
NOTE: The illustration is schematic - details may vary
depending on car model.
To reactivate the Speed Limiter from standby
mode:
–
Press the steering wheel button (1).
> The driver display's speed limit markings
change colour from GREY to WHITE - the
car's speed is then limited again by the
last stored maximum speed.
or
–
Press the steering wheel button (2).
> The Speed Limiter indicators and symbols
in the driver display change colour from
GREY to WHITE — the car will now apply
its current speed as the maximum speed.
Related information
•
Speed Limiter (p. 272)
Deactivating the Speed Limiter
The speed limiter (SL
17
) can be deactivated.
NOTE: The illustration is schematic - details may vary
depending on car model.
1.
Press the steering wheel button (2).
> The speed limiter is set in standby mode.
2.
Press the steering wheel button ◀ (1) or ▶
(3) to change to another function.
> The driver display's symbol and indicator
for speed limiter (4) are switched off -
which deletes the set/stored maximum
speed.
3.
Press the steering wheel button
(2)
again.
> Another function is activated.
16
Speed Limiter
17
Speed Limiter