DRIVER SUPPORT
278
Activate/deactivate Automatic
Speed Limiter
The automatic speed limiter function (ASL
21
)
can be activated and deactivated as a supple-
ment to the speed limiter (SL
22
).
Activate ASL
The Speed Sign Assist but-
ton is located in the function
view of the centre display.
To activate the automatic speed limiter:
1.
Press the
Speed Sign Assist button.
> ASL is set in standby mode, a green indi-
cator appears on the button, and the
driver display shows a sign symbol in the
centre of the speedometer.
2.
Press the steering wheel button
.
> ASL is activated with the car’s current
speed.
NOTE
•
If the Automatic Speed Limiter function is
activated, road sign information is shown
in the driver display even if RSI is not
activated.
•
To remove road sign information from the
driver display, you must deactivate both
Automatic Speed Limiter and RSI.
•
When the Automatic Speed Limiter func-
tion is activated but RSI is deactivated, no
warnings are given from RSI. In this situa-
tion, settings for RSI cannot be adjusted
either - to be able to adjust settings as
well as receive warnings, RSI must be
activated.
Deactivate ASL
To deactivate the automatic speed limiter:
–
Tap on the Speed Sign Assist button in
the function view.
> ASL is deactivated and the button's indi-
cation becomes GREY - SL is activated
instead.
WARNING
After switching from ASL to SL the car will no
longer follow the signed speed limit but only
the maximum speed stored in memory.
Related information
•
Speed Limiter (p. 272)
21
Automatic Speed Limiter
22
Speed Limiter
To Next Page
Loading...
