EasyManua.ls Logo

Volvo S90 TWIN ENGINE - Deactivate Cruise Control and Set It

Volvo S90 TWIN ENGINE
662 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DRIVER SUPPORT
}}
283
Deactivate Cruise Control and set it
in standby mode
Cruise control (CC
31
) can be temporarily deacti-
vated so that it is set in the standby mode and
can be reactivated later.
Deactivate Cruise Control and set in
standby mode
NOTE: The illustration is schematic - details may vary
depending on car model.
To set cruise control in standby mode:
Press the steering wheel button (2).
> The cruise control markings and symbols
in the driver display change colour from
WHITE to GREY - cruise control is now
temporarily deactivated and the driver
must then manually control the speed.
Standby mode on driver intervention
The cruise control is temporarily deactivated and
set in standby mode if:
the foot brake is used
the gear selector is moved to N position
the clutch pedal is held depressed for longer
than 1 minute
the driver maintains a speed higher than the
stored speed for longer than 1 minute.
The driver must then control the speed himself/
herself.
A temporary increase in speed with the accelera-
tor pedal, e.g. during overtaking, does not affect
the setting - the car returns to the last stored
speed when the accelerator pedal is released.
Automatic standby mode
Cruise control is temporarily disengaged and set
in standby mode if:
wheels lose traction
engine speed is too low/high
brake temperature is too high
speed falls below 30 km/h (20 mph).
The driver must then control the speed himself/
herself.
Related information
Cruise Control (p. 280)
Reactivating Cruise Control from
standby mode
Cruise control (CC
32
) can be temporarily deacti-
vated so that it is set in the standby mode and
can be reactivated later.
Reactivating cruise control from
standby mode
NOTE: The illustration is schematic - details may vary
depending on car model.
To start cruise control from standby mode:
Press the steering wheel button (1).
> The cruise control markings and symbols
in the driver display change colour from
GREY to WHITE — the car will now follow
the most recently stored speed again.
31
Cruise Control
32
Cruise Control

Table of Contents

Other manuals for Volvo S90 TWIN ENGINE

Related product manuals