Volvo S90 TWIN ENGINE - Change between Cruise Control and

||
DRIVER SUPPORT
* Option/accessory.
300
Related information
•
Adaptive Cruise Control* (p. 288)
Change between Cruise Control
and Adaptive Cruise Control
In a car with Adaptive Cruise Control (ACC
56
)
the driver can change between Cruise Control
(CC
57
) and ACC.
A symbol in the driver display shows which cruise
control is active:
CC ACC
A A
Cruise control Adaptive cruise control
A
WHITE symbol: Function active, GREY symbol: Standby mode
Changing from ACC to CC
Proceed as follows:
1. Set adaptive cruise control to standby mode
using steering wheel button .
2.
Press the
Cruise Control button in the cen-
tre display's function view - the button's indi-
cator changes colour from GREY to GREEN.
> The symbol in the driver display changes
from
ACC to CC. Adap-
tive Cruise Control is now switched off
and Cruise Control is set to standby
mode.
3.
Press the steering wheel button .
> Cruise control starts and stores the cur-
rent speed.
WARNING
Switching from ACC to CC means that the
car:
•
no longer maintains a preset time interval
to the vehicle ahead.
•
only follows the stored speed, and the
driver must therefore apply the brakes
when necessary.
If CC is active when the engine is switched off,
ACC will be activated automatically the next time
the engine is started.
Changing from CC to ACC
Proceed as follows:
1. Set cruise control to standby mode using the
steering wheel button.
56
Adaptive Cruise Control
57
Cruise Control