||
DRIVER SUPPORT
* Option/accessory.
376
Related information
•
Steering assistance at risk of collision
(p. 370)
Activating/deactivating Steering
assistance on risk of rear-end
collision*
The function can be selected - the driver can
choose to have it On or Off.
Proceed as follows to switch it off:
1. Select
Settings My Car IntelliSafe in
the centre display's top view.
2.
Deselect
Collision avoidance assistance.
> The function is then disengaged.
NOTE
When the Collision avoidance assistance
function is deactivated, all subfunctions are
switched off:
•
Steering assistance at risk of road depar-
ture
•
Steering assistance at risk of oncoming
collision
•
Steering assistance at risk of rear-end
collision*
Even though it is possible to deactivate the
function, it is advisable for the driver to always
have it activated since it improves driving
safety in most cases.
Related information
•
Steering assistance at risk of collision
(p. 370)
Limitations for steering assistance
upon risk of rear-end collision
In certain situations the function may have lim-
ited functionality and fail to intervene in the fol-
lowing cases, for example:
•
for small vehicles, such as motorcycles
•
if the majority of the car has steered into the
adjacent lane
•
on roads/in lanes with unclear or non-exis-
tent lane markings
•
outside the speed range 60-140 km/h
(37-87 mph)
•
when the power steering works at reduced
power - e.g. during cooling due to overheat-
ing (see section "Speed-dependent steering
force").
Other demanding situations can include:
•
road works
•
winter road conditions
•
narrow roads
•
poor road surface
•
a very “sporty” driving style
•
poor weather with reduced visibility.
In these demanding situations, the function may
have difficulty helping the driver correctly. In such
cases it is recommended to switch off this func-
tion.
To Next Page
Loading...
