HYBRID INFORMATION
409
Indicator shows selected charging current
3
.
The symbol illuminates when the charging
cable is plugged into a 230 V socket
4
(alter-
nating current).
Pushbuttons to increase and decrease the
charging current.
The symbol illuminates when the charging
cable is plugged into the car's charging input
socket.
NOTE
The charging cable will remember the last
setting of the charging current. It is therefore
important to adjust the setting if another
230 V socket (alternating current) is used at
the next charging.
On the charging cable's control unit, set the
required charging current 6-16 A
3
. On delivery,
the lowest possible charging current is preset.
Related information
•
Charging current (p. 404)
•
Charging cable (p. 406)
•
Charging status in the charging cable's con-
trol unit (p. 414)
•
Start charging the hybrid battery (p. 410)
Opening and closing the hatch for
the charging input socket
The flap for the hybrid battery's charging input
socket is opened manually.
First unlock the car with the remote control key.
Press in the rear section of the cover and
release.
Open the cover.
Close the cover for the charging input socket in
reverse order.
NOTE
Since the boot lid/tailgate is locked while
driving, the car must be unlocked again for
the boot lid/tailgate to be opened.
Related information
•
Start charging the hybrid battery (p. 410)
•
Stop charging of hybrid battery (p. 418)
•
Charging the hybrid battery (p. 403)
3
Maximum charging current may vary depending on market.
4
The voltage in the socket may vary depending on market.
To Next Page
Loading...
