HYBRID INFORMATION
415
Control unit indicators Status Specification Recommended action
The indicator for charging current (1) is
extinguished. The car symbol (4) illumi-
nates with a constant green glow.
Standby
•
The charging cable is connected to the car.
•
Charging is possible but has not yet been
activated by the electronics in the car.
Wait until the battery is fully charged.
Existing charge current is shown by a
green indicator (1). The car symbol (4)
illuminates with a constant green glow.
Charging in pro-
gress.
•
The car's electronics have started charging.
•
Charging in progress.
Wait until the battery is fully charged.
The indicator for charging current (1) is
extinguished. The car symbol (4) flashes
red.
Charging is not
possible.
•
There is a communication error between
the control unit and the car.
•
The ventilation for the car's electronics is
not adequate, not activated or defective.
1. Check all connections or use another
230 V socket (alternating current).
2. Restart the battery charging.
The car symbol (4) illuminates with a con-
stant red glow.
Charging is not
possible.
•
The ground fault breaker on the charging
cable has triggered.
1. Unplug the charging cable from the
230 V socket.
2. The ground fault breaker is reset and
the unit restarts.
3. If the problem persists - consult a
qualified professional
The indicator for charging current (1) and
the house symbol (2) flash red.
Charging is not
possible.
Temperature monitoring has triggered for the
230 V socket.
Restart charging. If the problem persists -
consult a qualified professional.
Related information
•
Charging the hybrid battery (p. 403)
•
The charging cable's control unit (p. 408)
•
Charging status in the car's charging input
socket (p. 412)
•
Charging status in the car's driver display
(p. 416)
•
Stop charging of hybrid battery (p. 418)
To Next Page
Loading...
