POWER* FRONT SEATS
Use the controls on the outside of the seats to adjust the seat position,
lumbar support*, etc. One control is shaped like a seat so you can more
easily understand how you change position, the other one, the multi-
function control*, is used for adjusting lumbar support, massage*, etc.
The seat-shaped control
Adjust the seat cushion or move the whole seat using the lower control.
Adjust the angle of the backrest using the rear control.
Multi-function control*
Settings for massage*, side support*, lumbar support* and seat cushion
extension are linked to the multi-function control.
1. Activate seat setting in the centre display by turning the control.
2. Select the desired function in the centre display by turning the con-
trol.
3. Change the setting by pressing in the upper/lower/front/rear part of
the control.
Saving settings
1.
Set the seat, door mirrors and head-up display* to the desired posi-
tion and press the M button on the door panel. The light indicator in
the button illuminates.
2.
Within 3 seconds, press the memory button 1 or 2. An acoustic sig-
nal sounds and the light indicator in the M button extinguishes.
To use your saved seat settings:
With the door open - push and release one of the memory buttons.
With the door closed - hold one of the memory buttons pressed in until
the stored position is reached.
To Next Page
Loading...
