DRIVER SUPPORT
}}
297
Reactivating Cruise Control from
standby mode
Cruise control (CC
28
) can be temporarily deacti-
vated so that it is set in the standby mode and
can be reactivated later.
Reactivating cruise control from
standby mode
NOTE: The illustration is schematic - details may vary
depending on car model.
To start cruise control from standby mode:
–
Press the steering wheel button (1).
> The cruise control markings and symbols
in the driver display change colour from
GREY to WHITE — the car will now follow
the most recently stored speed again.
or
To start cruise control from standby mode:
–
Press the steering wheel button (2).
> The cruise control markings and symbols
in the driver display change colour from
GREY to WHITE — the car will now follow
the current speed.
WARNING
A significant increase in speed may follow
when the speed is resumed with the
steering wheel button.
Related information
•
Cruise control (p. 293)
Deactivating cruise control
Cruise Control — CC can be deactivated.
28
Cruise Control
To Next Page
