VONETS Mini Wifi Adapter
VAR11N-300
http://www.vonets.com/ProductViews.asp?D_ID=17#
We highly recommend using a LAN cable to connect your Scolia unit to your
router, as it offers the best and most stable connection. However, certain situations
may make it impractical or impossible to use a LAN cable – the VONETS Mini Wifi
Adapter is a quick and clean solution for these cases.
Please keep in mind that the basic requirement for the Mini Wifi Adapter is a stable,
strong WiFi network available in your room.
SETUP GUIDE
The setup of the VONETS Mini Router is quick and easy.
1. Connect the Mini Wifi Adapter to the power supply
You can easily do this by connecting its USB cable to the fourth USB port on your
Scolia processing unit (the charging port in case you have a Pro system).
Wait for the system to boot up. As soon as the second blue LED starts blinking fast,
the device is ready and you can start configuring it.
2. Login to the Mini Wifi Adapter’s interface
Open the WiFi settings of your tablet/phone and join the VONETS WiFi connection.
The default password is 12345678. Open your Internet browser and enter the IP
address 192.168.253.254.
Log in to the interface of the router.
Enter the default username: admin
password: admin
To Next Page
Need help?
General
