TECHNICAL SPECIFICATION / TECHNISCHE SPECIFICATIE / TECHNISCHE
DATEN / ESPECIFICACIONES TÉCNICAS / SPÉCIFICATIONS TECHNIQUES /
SPECYFIKACJA TECHNICZNA
Frequency response: 20Hz – 20KHz
THD: <0.02%
Input level – mic: 1mV, 1kohm
Input level – phono: 3mV, 50kohm
Input level – line: 150mV, 100kohm
Signal-to-noise ratio – mic: >70dB
Signal-to-noise ratio – phono: >70dB
Signal-to-noise ratio – line: >80dB
Output level – master: 1.5V
Output level – headphone: 200mW
Power supply: 110~240VAC 50Hz (12V adapter)
Dimensions (L x W x H): 190 x 295 x 50mm
Weight: 1,25kg
The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed
without prior notice.
The products referred to in this manual conform to the European Community Directives to which they are subject:
• Low Voltage (LVD) 2014/35/EU
• Electromagnetic Compatibility (EMC) 2014/30/EU
• Radio Equipment Directive (RED) 2014/53/EU
• Restriction of Hazardous Substances (RoHS) 2011/65/EU
To Next Page
Loading...
