5 4
Mount the Impact spotting scope on a sturdy tripod or
car window mount for steady viewing. Simply secure the
tripod mounting foot on the tripod head or quick-release
plate of a standard camera or camcorder tripod.
Using the Impact Spotting Scope
Attaching the spotting scope to a tripod
The Impact spotting
scope uses a standard
1/4”–20 screw thread
on the underside of the
mounting foot.
The Impact’s eyepiece features long eye relief and an
adjustable rubber eyecup for comfortable viewing
whether or not you wear eyeglasses or sunglasses.
Adjustable eyecups
With eyeglasses or
sunglasses, fold back
the eyecup.
Without eyeglasses or
sunglasses, keep the eyecup
fully extended.
Adjustable 25–75x zoom eyepiece
The Impact features a versatile 25–75x eyepiece that
brings distant details
into view. Refocusing
is normally required
when you change the
magnification.
• Increase magnification by turning the
adjustment ring to the left (counter-clockwise).
• Decrease magnification by turning the
adjustment ring to the right (clockwise).
Focus the Impact spotting scope by slowly rotating the
focus dial until you see
a sharp, clear image
through the eyepiece.
Focusing the eyepiece
To Next Page
Loading...
