2
d. Installation must be stopped if any gas leakage, and the unit must be returned to professional
maintenance center.
3. Transportation and Storage
a. Sealing is not allowed during transportation
b. Transporting goods at a constant speed is needed to avoid sudden acceleration or sudden
braking, so as to reduce the collision of goods.
c. The unit must be far away from any source of re.
d. Storage place must be bright, wide, open and good ventilation, ventilation equipment is
required.
4. Maintenance Notice
a. If maintenance or scrap is required, contact an authorized service center nearby
b. Qualication requirement
All operators who dispose gas must be qualied by valid certication which issued by
professional agency.
c. Please strictly comply with the requirement from manufacturer when maintenance or lling gas.
Please refer to the technical service manual.
To Next Page
Loading...
General