- 3 -
The Razor HD comes with a rainguard for
the ocular lenses and tethered objective lens
covers. Use these covers to protect the lenses
whenever you are not viewing.
Lens Covers
The protective case of the Razor HD provides
safe storage between viewing sessions. The
carry strap is already attached to the case.
Carry Case
ACCESSORIES FOR THE RAZOR HD
Attach the padded neckstrap to the Razor HD in three simple steps.
Begin with the right barrel of the binocular and repeat the process for
the left barrel.
Neckstrap
1. Push a few inches of
the strap through the
strap attachment on the
binocular.
3. Adjust the overall
length, then pull the tight
until strap secured within
the buckle.
2. Hold the buckle
and thread the end of
the strap through the
buckle.
Note: If using another type of strap, never attach the metal O-rings directly onto
the strap attachment.
LENS CARE
Maintain the optical brilliance of the Razor HD binocular by keeping
the lens surfaces free of dirt, oils, and dust.
Protect lenses while out in the field
Make use of the provided eyepiece and objective lens covers to protect
the lenses when not viewing. Then, store the Razor HD in its carry
case between viewing sessions.
Keep lenses clean
In order to enjoy the best views through your Razor HD binocular,
take time to regularly clean the exterior lenses:
1. Remove any dust or grit from lenses before wiping. Use a can
of pressurized air, a soft camel hair brush, or an acrylic optical brush.
2. Clear lenses of smudges, fingerprints, or eyelash oil. Fog the
lenses with your own breath, then use a non-abrasive lens cloth to
clean the lenses.
Note: Use lens cleaning fluid
and optical paper to clean
lenses. Never use facial tissue,
heavy cotton, or flannel cloth
on lenses—these materials can
scratch the surface of a lens.
To Next Page
Loading...
Need help?
General
