11
Starting a wash cycle...
Draw out the basket(see the sectio n entit led Loading the Dishwasher ).
Pour in the detergent (see the section entitled Salt,
Detergent and Rinse Aid ).
Insert the plug into the socket. The power supply is 220-240
VAC 50 HZ, the specification of the socket is 10 A 250 VAC.
Make sure that the water supply is turned on to full pressure.
“ ”
“
”
Press the program button , the wash program will be changed as follows direction
If a program is selected, the response light will light. Then press the
button, the dishwasher begins to start.
ECO ->Intensive->Normal->Glass->Rapid ;
Start/Pause
When you press the button to pause during washing,
the program light will stop blinking and the dishwasher will mooing
ev ery minute unless you press the button to sta rt.
Start/Pause
Start/Pause
*EN 50242 : This programme is the test cycle. The information for comparability test
in accordance with EN 50242, as follows:
Capacity: 6 setting
The power consumption of off-mode is 0.49W
left-on mode is 0.49W
Rinse aid setting: 6
For normally soiled load s,
suc h as pots, plates,
glasses and ligh tly
soiled pans.
For hea vies t s oi led crocke ry,
and normally soile d pots
pans dishes et c with drie d
on soiling.
、
、
A shorter wash for lightly soiled
lo ads and qui ck was h.
15 g
1 20
1 80
140
30
0. 7
0 .61
0. 9
0 .23
8
6. 5
10
6
Pre-wash
Wash (60 )
Rinse
Rinse (70 )
Drying
℃
℃
Pre-wa sh
Wash (50 )
Rinse
Rinse (70 )
Drying
℃
℃
Wash (4 0 )
Rinse
℃
Rinse (40 )℃
Intensive
P re -wash 50
Wash (70 )
R inse
R inse
R inse (70 )
D ry ing
℃
℃
℃
( )
Ra pid
Norm al
(*EN 50242)
3/15 g
This is standard programme,
it is sui table to clean norm ally
soil ed tableware and i t is the
most e fficient pro gr amme in
terms of its comb i ne d energy
and water consumption for
that type of tab leware.
Wash (45 )
Rinse
Rinse (60 )
Drying
℃
℃
For lig ht ly so iled loads ,
such a s glas ses, crystal an d
fine ch ina.
75 0. 5 7
3/15 g
3/15 g
(Or3in1)
18g
(Or3in1)
(Or3in1)
(Or3in1)
To Next Page
Loading...