Why does my VQ OrthoCare Personal Care Products screen say warning incorrect power supply connected?
The OrthoStim4 device is designed to function only with the AC Adapter provided by VQ OrthoCare. Please ensure you are using the correct adapter.
What to do if VQ OrthoCare Personal Care Products screen displays battery low?
This message indicates that the Power Packs are low. You can either replace them with a new set or plug in the AC Adapter to continue using your VQ OrthoCare Personal Care Products device.
How to fix weak stimulation with VQ OrthoCare Orthostim 4 Personal Care Products even at maximum intensity?
Weak stimulation, even at maximum intensity, is most likely due to low batteries. Replace the Power Packs. It can also be caused by a decrease in sensation over certain areas of the skin; use caution when increasing intensity in these situations.
What to do if VQ OrthoCare Orthostim 4 screen displays a problem has been detected with your device?
This message means the device did not pass the internal diagnostic testing. Do not use the device. Call Patient Care for a replacement of your VQ OrthoCare Personal Care Products.
General| Channels | 4 |
|---|---|
| Intensity Levels | Adjustable |
| Battery Type | Rechargeable |
| Portability | Portable |
| Modes | Multiple |
| Usage | Home |
| Therapy Type | TENS, EMS |
Displays parameters and status during Interferential treatment.
Details parameters and status for Neuromuscular treatments.
Shows parameters for Pulsed Direct Current treatments.
To Next Page