VR46 UP! - 8. Removing and fitting the battery; Battery Removal and Installation

10
1. Press the button
located on the display
cover lock to open it.
1. Open the display
cover and the battery
compartment cover.
Removal
Assembly
2. Unscrew the battery
compartment cover.
2. Align the groove
of the battery with
the groove in the
upright and slowly
insert the battery
inside (pay attention
to the direction of the
groove).
3. Pull the battery
upwards to remove it.
3. Tighten the battery
compartment cover,
push the display
cover lock down
and complete the
installation.
8. Removing and tting the battery