EasyManua.ls Logo

VR46 UP! - 18. Troubleshooting

VR46 UP!
251 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
26
18. Troubleshooting
Tests to be carried out:
Following a fall, check that the accelerator lever works properly. To do this, accelerate and decelerate
several times.
Check from time to time that the brakes are working properly. To do this, move the vehicle by pushing it
manually and brake suddenly to make sure that it responds to the commands.
Check that all vehicle components are in place and securely fastened.
Check the condition and pressure of the tyres.
Check the wear of the brakes and cables.
Error Cause Solution
The motor is not running
The battery is depleted Charge the battery
Electrical problem Request technical support from your dealer
The motor stops while it is running Motor overheating
Release the accelerator and wait for it to cool
down
After it has been charged, the vehicle turns
itself off
The battery is damaged Request technical support from your dealer
After it has been charged, the vehicle turns
itself off
Power and control cables damaged Request technical support from your dealer
The battery does not charge or the scooter
does not turn on
Connection problems Request technical support from your dealer
Damaged/dead battery Request technical support from your dealer
Problems with the battery charger Replace the battery charger

Related product manuals