7
5. Insert the spiral ramp with the
number “5” engraving on the back
into the number “4” spiral ramp;
repeat the above to fix the tower roof,
labellednumber“6”intoplace.
6. Inserttheparkingtowersignintothe
slots on the tower roof and attach the
spinner to the archway, then insert
the archway into the slot on the tower
base.
Assemble the car wash centre:
7. Insert the car wash centre into the car wash centre base track.
After that, connect the car wash centre and the car parking tower
with the ramp track with the number “7” engraving, and attach the
ramp track with the number “8” engraving to the car wash centre
platform.
Assembly Instructions