7
4. Attach the zebra’s head to the body by
snapping the head onto the body. You
will hear it click into place. Please ensure
the head is attached securely to the body.
Once the head has been attached, it
cannot be removed again.
5. Turn the zebra over to tighten the two
longer screws with a screwdriver. These
are the screws that attach the neck to the
body.
6. Insert the big screw under the seat. You
will hear a loud ‘click’ sound.
7. Insert the seat into the hinges of the neck.
You will hear a loud ‘click’ sound. This
indicates the seat is securely xed to the
neck.
Once the 3-in-1 Learning Zebra Scooter™ is assembled, it cannot
be disassembled.
Assembly Instructions
To Next Page
Loading...
