VTech 3-in-1 Smart Wheels User Manual

5
Instructions & Activities
3. Insert the four wheels into the two legs.
Once the wheels have been inserted, they
cannot be removed again.
4. Insert the legs into the holes on both sides of the main body. Tighten
the screws to secure the legs into the main body. Please ensure
the legs are fully inserted and secured into the main body to avoid
injury.
5. Attach the electronic activity panel to the handle.
Attaching/Removing Activity Panel
1. To attach the activity panel, push the release
locks located on the bottom of the activity
panel towards the center. Insert the back of
the activity panel to the handle, then release
the locks. Please ensure the activity panel
is attached securely to the handle.
2. To remove the activity panel, push the
release locks located on the bottom of the
activity panel towards the center. Pull the
activity panel away from the handle.
A
B
70500 Manual.indd 5 5/2/06 10:02:56 AM

VTech 3-in-1 Smart Wheels Specifications

General

Brand	VTech
Model	3-in-1 Smart Wheels
Category	Toy
Language	English