VTech Go! Go! Cory Carson Fire Rescue Cory User Manual

PRODUCT FEATURES
1. On/Off Switch
To turn the unit On, slide the On/Off Switch
to the On position. To turn the unit Off,
slide the On/Off Switch to the Off position.
2. Automatic Shut-Off
To preserve battery life, the Go! Go! Cory Carson
®
character will
automatically power down after approximately 30 seconds without input.
The unit can be turned on again by pressing the Light-Up Button, placing
the accessory on or removing the accessory from the character or by rolling
the character quickly.
NOTE: This product is in a Try-Me mode in the packaging. After opening the
packaging, turn the character Off and On again, or before the product goes into
sleep mode, put the accessory on top of the character for more than 2 seconds
to proceed with normal play. If the unit powers down while playing, we suggest
changing the batteries.
NOTE : Ce produit est actuellement en mode démonstration. Une fois déballé,
veuillez éteindre puis remettre en marche ce jouet ou veuillez placer l’accessoire
sur le personnage pendant plus de 2 secondes avant qu’il ne se mette en veille
pour activer toutes ses fonctionnalités. Si le personnage s’éteint pendant le jeu,
veuillez insérer des piles neuves.
ACTIVITIES
1. Light-Up Button
Press the Light-Up Button to hear sounds,
songs, phrases and melodies. The light will
flash with the sounds.
3 4
2. Stacking Fun
Place the accessory on the character’s back
to unlock new phrases and fun content. The
lights will flash with the sounds.
3. Sounds and Melodies
Push to hear fun sounds. If a melody is
already playing, push the character to add
fun sounds on top of the melody. The light
will flash with the sounds.
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat sources.
3. Remove the batteries if the unit will not be in use for an extended period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit to moisture
or water.
TROUBLESHOOTING
If for some reason the unit stops working or malfunctions, please follow these steps:
1. Turn the unit Off.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit On. The unit should now be ready to use again.
5. If the unit still does not work, install a new set of batteries.
IMPORTANT NOTE:
If the problem persists, please call our Consumer Services Department
at 1-800-521-2010 in the U.S., 1-877-352-8697 in Canada, or by going to
our website vtechkids.com and filling out our Contact Us form located
under the Customer Support link. Creating and developing VTech products
is accompanied by a responsibility that we take very seriously. We make
every effort to ensure the accuracy of the information, which forms the
value of our products. However, errors sometimes can occur. It is important
for you to know that we stand behind our products and encourage you to
contact us with any problems and/or suggestions you might have. A service
representative will be happy to help you.
WARNING:
Adult assembly required for battery installation.
Keep batteries out of reach of children.
ATTENTION :
Les piles ou accumulateurs doivent être installés par un adulte.
Tenir les piles ou accumulateurs hors de portée des enfants.

VTech Go! Go! Cory Carson Fire Rescue Cory Specifications

General

Brand	VTech
Model	Go! Go! Cory Carson Fire Rescue Cory
Category	Toy
Language	English