9
4. Insert the OBSERVATION TOWER RAILING into the 2ND FLOOR
BASE. Then, attach the 2ND FLOOR BASE to the 1ST FLOOR
MAIN WALL as shown in the picture.
5. Insert the 2ND FLOOR MAIN
WALL into the 2ND FLOOR BASE
as shown in the picture.
6. Insert the ELECTRONIC CLOCK TOWER, the TWIN TOWER WITH
TOY ENGRAVINGS and the SINGLE TOWER ROOF into the 2ND
FLOOR MAIN WALL as shown in the picture. You will hear a “click”
sound when the pieces are secure.
ASSEMBLY INSTRUCTIONS
Twin Tower with
Toy Engravings
To Next Page
Loading...
