VTech Go! Go! Smart Wheels Fast & Friendly Garage - ASSEMBLY INSTRUCTIONS

11
ASSEMBLY INSTRUCTIONS
1. Assemble and attach the car wash and ground floor components
followingthestepsbelow:
A. Insert the two Car Wash Supports into the Car Wash Base,
as shown below. Make sure you hear a click sound to confirm
the supports and base are firmly connected. Then insert the Car
Wash Roller between the two supports as shown.
B. Attach the Ground Floor Support to the Ground Floor Base,
as shown below. A click sound confirms the support and base
are firmly connected. Attach the Main Support to the Ground
Floor Base as shown. Tighten it with three screws to secure.
BACK
C. Attach the Car Wash to the Ground Floor Base, as shown
With the Go! Go! Smart Wheels Fast & Friendly Garage, safety
comes first. To ensure your child’s safety, adult assembly is required.