14
4. Assemble and attach the track components following the steps
below:
A. Insert the Hanging Sign Support to the Hanging Sign Plate,
and then insert it to the Sliding Track A, as shown below. Insert
the Track Switch Gate into Track B as shown. Make sure you hear
a click sound to confirm the Track Splitter and the Track B are
firmly connected.
B. Connect Track C and Track D together, and then attach Track D
to the Ground Floor Base, as shown below. Make sure you hear a
click sound to confirm they are firmly connected.
C. Attach Track B to Track C, the Second Floor Platform and the
Main Support, as shown below. Make sure you hear a click sound
to confirm they are firmly connected.
To Next Page
Loading...
