11
6. Insert the H-shape support into the SmartPoint
®
base as shown
below.
7. Insert the paint station accessory piece into the SmartPoint
®
paint
station as shown below. You will hear a “click” sound to indicate
the paint station accessory piece is secure. Then, attach the
SmartPoint
®
paint station to the supports as shown below. Press
down firmly to make sure the SmartPoint
®
paint station is secure.
8. Insert the fuel station accessory piece into the SmartPoint
®
fuel
station as shown below. Press down firmly to make sure the fuel
station accessory is secure. Then, attach the SmartPoint
®
fuel
station to the supports as shown below. Press down firmly to make
sure the SmartPoint
®
fuel station is secure.
ASSEMBLY INSTRUCTIONS
To Next Page
Loading...
