4
WARNING:
CHOKING HAZARD -Toy contains
small parts and small balls.
Not for children under 3yrs.
INSTRUCTIONS
Battery Removal and Installation -- Sky Elevator
1. Make sure the unit is turned Off.
2. Find the battery cover located on the
back of the unit, use a screwdriver
to loosen the screw and then open
the battery cover.
3. Remove old batteries by pulling up
on one end of each battery.
4. Install 3 new AAA (LR03/AM-4) batteries following the diagram
inside the battery box. (For best performance, alkaline
batteries or fully charged Ni-MH rechargeable batteries are
recommended.)
5. Replace the battery cover and tighten the screw to secure.
To Next Page
Loading...
