VTech Prance & Rock Learning Unicorn 1923 User Manual

7
3. Insert the Prance & Rock Learning
Unicorn
TM
onto the support brackets
as shown.
4. Insert the two plastic screws into the
holes in the front link and back link
brackets. Turn the screws clockwise
to secure. You will hear the locks click
into place to indicate they are attached
securely.
5. Insert the two handles into the sides
of the unicorn’s head. You will hear the
handles click into place to indicate the
handles are attached securely. Once
the handles have been attached, they
cannot be removed.
TRANSFORM FROM ROCKER TO RIDE-ON MODE
1. To change the unicorn from rocker mode to ride-on mode, press
and hold the lock next to the plastic screws and turn the screws
counterclockwise. Remove the rocker panel and turn it over so
the wheels are on the ground. Reinsert the two plastic screws into
the holes in the front link and back link brackets. Turn the screws
clockwise to secure.

VTech Prance & Rock Learning Unicorn 1923 Specifications

General

Brand	VTech
Model	Prance & Rock Learning Unicorn 1923
Category	Toy
Language	English