8
ASSEMBLY INSTRUCTIONS
1. Insert the 4 wheels into the two
rockers as shown. You will hear the
wheels click into place to indicate
they are attached securely.
2. Insert the front link bracket and the back link bracket onto the
inside of the rockers. Secure the brackets to the rockers with the
small screws provided.
3. Insert the Rock & Ride Unicorn onto
the support brackets as shown.
4. Insert the two plastic screws into the
holes in the front link and back link
brackets. Turn the screws clockwise
to secure. You will hear the locks
click into place to indicate they are
attached securely.
To Next Page
Loading...
Need help?
General