23
Telephone operation
Telephone operation
SIP contemporary 1-line - S2210-L
Hold
To place a call on hold:
1. During a call, press HOLD on the telephone base to place that call on hold. The LINE key flashes when the call is placed
on hold.
2. To release the call from hold, press the LINE key.
Transfer a call
1. During a call, press FLASH to put the current call on hold.
2. When you hear a dial tone, dial the number you want to transfer the call to.
3. When you hear the ringing tone or the call is answered, press LINE or place the corded handset back in the telephone base.
Then the call is transferred.
Computer port
You can route your computer through the COMPUTER port (RJ-45) on the side of the telephone base to get Internet access.
USB port
The port on the side of the telephone base can be used for charging devices (up to 500mA @ 5V). Charging will be
suspended when there is an incoming call or the telephone is in use.
To Next Page
Loading...
Need help?
General
