SIP petite 2-line - S2221-L
Conference call
This telephone allows three-way conversations.
To initiate a conference call:
1. Place a call to the first party.
2. Press HOLD to place the first party on hold.
3. Place a second call on the other line.
4. Once the second party is on the line, press CONF to start a three-way conference.
To initiate a conference call while two calls are on hold:
Press CONF to start a three-way conference.
To end a conference call:
• Press a line key to maintain the connection with that line and drop the other line.
• Place the corded handset back in the telephone base or press CONF to end.
Computer port
You can route your computer through the COMPUTER port (RJ-45) on the side of the telephone base to get Internet access.
USB port
The port on the side of the telephone base can be used for charging devices (up to 500mA @ 5V). Charging will be
suspended when there is an incoming call or the telephone is in use.
Telephone operation
28
To Next Page
Loading...
Need help?
General
