VTech Sit-to-Race Smart Wheels - Convert to Ride-On Mode; Remove Handle in Ride-On Mode; Product Features; Mode Selector

9
2. To convert to ride-on mode, squeeze the two locks under the front
wheels to disconnect the handle. Rotate the handle to a vertical
position behind the body.
Secure the handle by tightening the
large screw.
PLEASE NOTE:
• The handle is designed for parental use only. This product
should not be used by a child as a push toy.
3. To remove the handle in ride-on mode, press and hold the green
button on the seat and unscrew the large screw. Then, move the
handle to a 45-degree angle and remove it from the axle.
Product Conversion