7
3. Attach the dashboard activity panel to
the body by snapping the dashboard
activity panel onto the body. You
will hear it click into place. Please
ensure the dashboard activity panel
is attached securely to the body.
4. To assemble the parent handle, first
insert the handle grip into the middle
support. Attach each side piece by
pushing down the locks on the side
piece and inserting the male parts of
the handle grip and middle support
into the corresponding female parts
of the side piece. You will hear the
side pieces click into place.
5. Place the bottom of the parent handle onto the back axle at a
45-degree angle, then rotate the handle up to connect to the rear
of the seat. Lock the parent handle in place by tightening the large
screw.
Product Assembly
To Next Page
Loading...
