8
8
8
8
2.
Volume Switch
To adjust the volume, slide the Volume
Switch to the Low Volume ( ) or High
Volume ( ) position.
3.
Walker Storage
To fold the legs in for storage, slide and
hold the blue locks on the back of the
walker and push down on the legs.
4. Speed Control Switch
The Sit-to-Stand Stroll & Discover
Activity Walker™ is equipped with a
speed control switch on the two back
wheels of the walker. Position one is for
babies who are just learning to take their
first steps. This position has the most
tension on the wheels and will not allow
the walker to move too quickly. Position
two is intended for the more skillful
walker. This position has less tension
on the wheels and will allow the walker
to move more freely. When adjusting the
speed control switch, please make sure
both wheels are set to the same position.
To Next Page
Loading...
Need help?
General
