To Next Page
J
Jennifer MillerJul 30, 2025
Why is water not being supplied to my Vulcan-Hart Electric Steamer generator?
- RRichard ScottJul 30, 2025
Several factors can cause this. Scalants might be covering the water level control probe, giving a false reading. Detach, remove, and thoroughly clean the water level probe assembly to remove scalants and lime build-up. Also, the water condition must be cleared up immediately with a proper water conditioner, or you can replace the water level probes and canister assembly. Also, check for a problem with the water solenoid valve. Finally, particles of scale trapped in the generator solenoid valve seat may prevent the valve from closing, leading to water draining through an open generator solenoid valve as quickly as it’s fed.
General
