Need help?Do you have a question about the VWR International VWR-E Series and is the answer not in the manual?
General| Capacity | 620 g |
|---|---|
| Calibration | External |
| Units of Measurement | Gram; Ounce; Pound |
| Display | LCD |
| Power | AC Adapter |
| Interface | RS-232 |
| Compliance | CE |
Check instrument for damage, ensure power compatibility, avoid hazardous locations, and use batteries correctly.
Verify package contents and read the operation manual for balance installation guidance.
Select a stable location free from drafts and vibrations, level the instrument, and allow warm-up time.
Use the original AC adapter and ensure power compatibility. Details on battery requirements for operation.
Properly adjust the feet to ensure the balance is level for accurate calibration and weighing.
Steps for performing balance calibration, including warm-up, zeroing, and using calibration weights.
Select from sixteen available measurement modes using the UNIT key.
Learn how to turn the display backlight on or off.
Configure the auto shutoff feature to activate or deactivate.
Utilize the TARE key to zero the balance for net weight measurements.
Configure RS232 communication parameters such as Baud Rate and Parity.
Guidelines for cleaning the balance and protecting it from damage.
Identify common error codes, their causes, and recommended solutions.
Technical specifications for the DB9 connector, transmission settings, and data format.
Contact information for technical assistance and service inquiries.
Environmentally responsible methods for disposing of the instrument and its components.
Information regarding the instrument's compliance with European standards and directives.
Detailed specifications including capacity, readability, linearity, and dimensions for various models.
Summary of key features such as a backlit display, overload protection, and RS232 communication.
Visual overview of the balance, highlighting the battery compartment and AC adapter port.
To Next Page
