Note: When the battery charge <5%, the speaker will
power off automatically.
Power On
Press Q) button until hear a risingtone and the
Bluetooth LED Indicator light on.
Power Off
Press (b button until hear a descending tone and
the Bluetooth LED Indicator light off.
Bluetooth connection
1. Press Q) button for 2-3 seconds until hear a rising tone and the
Bluetooth LED Indicator fast blinking blue.
2. Go to the Bluetooth settings on your mobile device, search and
select "W-KING T9-2" from the list.
3. Once successfully paired, the LED indicator turns solid blue.
Note:
• When power on, the speaker will automatically reconnect to the last
device it was connected to. (The speaker can memorize maximum of
8 paired devices ).
• The speaker will automatically shut down after 10 minutes in pairing
mode if no devices are paired for power saving.
03
To Next Page
Loading...