Need help?Do you have a question about the WACO YMF F5 Series and is the answer not in the manual?
Log of all revisions made to the manual, including date and pages affected.
Defines aeronautical terms and other terms used in the manual.
Explains annotations for notes, cautions, and warnings.
Details on Service Letters issued by WACO Classic Aircraft Corp.
Information on Service Instructions for maintenance personnel.
This manual constitutes the Instructions for Continued Airworthiness (ICA).
Provides a general description of the WACO Classic Aircraft YMF WACO F5 series.
Details aircraft specifications including model designations and dimensions.
Provides procedures for moving, taxiing, parking, mooring, and jacking the aircraft.
Instructions for moving the airplane by hand or towing.
Detailed procedures and cautions for taxiing the aircraft.
Instructions for applying and releasing the parking brake and parking.
Procedures for mooring the airplane for immovability and security.
Details on jacking points and procedures for lifting the aircraft.
Guidance on storing and cleaning the WACO airplane.
Information regarding airworthiness directives and inspections for the fuselage.
Instructions for servicing landing gear oleo shock struts.
Details on tail assembly and rigging, including stabilizer and elevator adjustments.
Assembly instructions for wings, including installation and rigging.
Maintenance and inspection requirements for NACA engine cowls.
Procedure for removing and installing the engine, including mounting bolt specifications.
Method for testing engine cylinder compression to determine internal condition.
Details on the four approved propeller installations for the YMF WACO F5 series.
Description of the gravity flow gasoline system from wing tanks to carburetor.
Details on the engine oil system, including reservoir and connections.
Information on the electrical system, batteries, alternator, and starter.
Specifies maintenance required under Federal Aviation Regulations.
States that there are no life limited parts for this aircraft.
Responsibility of owner/operator to ensure required inspections are completed.
Aircraft manufactured per STC SA1000GL and requires written consent for alterations.
To Next Page
General